Si-COAT® 528 AG™ Pigmented Low-VOC Anti-Graffiti Protective Coating

Anti-Graffiti
Scroll down

Introduction

Si-COAT® AG 528 Remarkable® Low VOC (Volatile Organic Compound) Anti-Graffiti Protective Coating is a permanent (non-sacrificial) one coat anti- graffiti protective coating. It is available in a variety of colors, and dries to a semi-gloss finish. It is suitable for use over metal, concrete, brick, stone, wood, fiberglass and pre-existing coatings. Si-COAT® AG 528™ meets the VOC limits set out by California’s South Coast Air Quality Management District (SCAQMD) for reduced environmental impact. This single component, room temperature vulcanizing (RTV), moisture cure polysiloxane anti-graffiti protective coating provides excellent durability and long service life. It can easily be applied using brush, roller or airless spray equipment. As a result of its specific chemistry, Si-COAT® AG 528™ Remarkable Low VOC forms chemical bonds with the host surface to enhance adhesion properties without the need for abrasive blasting, priming, and extensive site preparation. Due to the hydrophobicity of the coating, most graffiti-tagging can easily be removed from protected surfaces using water under low pressure. For best re- sults, graffiti tagging should be removed from Si-COAT® AG 528™ as soon as possible using a cold water pressure washer at 1200 psi.

Downloads

Technical Data Sheets & more

Si-COAT® 528 AG™

PDF / 317 Kbyte.

EN

Want to order?

Contact Us